Teac RC-601MKII - Manual (Page 27)

TASCAM RC-601MKII
27
OTHER FUNCTIONS & SETTINGS
Clearing the Frame Display
The frame digit in the time display that is displayed in the
display window can be cleared.
Select from the following using menu No. 18 (“FRAME”):
ON (default setting): The frame digit is displayed.
OFF: The frame digit is not displayed.
AUTO: The frame digit not displayed only during online
playback.
Timer Play Function
When the timer play function is set to ON, monitor playback
is started automatically when the remote control unit is
turned ON.
Select timer play function ON/OFF using menu No. 07
(“TIMER”).
Selection: OFF (default setting), ON
Viewing the Total Motor Time
To view the total time that the CD mechanism motor in
the remote control player has been used, select the item
following menu No. 23 (before menu No. 01) without a menu
No.
The menu example above shows that the total motor time is
234 hours.
External Control-related Settings
The rear panel of the CD-601MKII is provided with the
REMOTE (PARALLEL) terminal (37-pin D-Sub connector)
and the REMOTE (SERIAL) terminal (15-pin D-Sub
connector, RS-232C-compliant) for external control.
For example, fader start/stop and event start operations can
be performed using the REMOTE (PARALLEL) terminal.
The REMOTE (SERIAL) terminal can be used to control the
CD-601MKII from a computer. (Note, however, that when
the remote control unit RC-601MKII is used, the REMOTE
(SERIAL) terminal is exclusively for the remote control unit,
and cannot be used for other applications.)
For details on external control, refer to the Owner’s Manual
for the CD-601MKII.
RC-601MKII_Eng.indd 27 3/24/2005 2:38:31 PM