Teac US-600 - Manual (Page 13)

TASCAM US-600
13
3 − Installation
System requirements
See the TASCAM website (http://tascam.
com/) for updated information about OS
compatibility.
Windows
Supported operating systems:
Windows XP 32-bit SP3 or later
Windows XP 64-bit SP2 or later
Windows Vista 32-bit SP2 or later
Windows Vista 64-bit SP2 or later
Windows 7 32-bit
Windows 7 64-bit
Supported computer systems:
Windows compatible computer with a USB
2.0 port
CPU/clock speed:
Pentium 4 1.0 GHz or faster
AMD Athlon 1.0 GHz or faster
(or equivalent processor)
Memory:
1 GB or more
NOTE
Although this product has been checked
for use with typical computers that meet
the above operating requirements, we
cannot guarantee that it will operate with all
computers that meet these requirements.
Please be aware that even in the same
conditions, computer processing capabilities
can vary depending on differences in design
and specifications.
Mac OS X
Supported operating systems:
Mac OS X 10.5.8 or later
Mac OS X 10.6.3 or later
Supported computer systems:
Apple Macintosh equipped with a USB port
CPU/Clock:
Any Mac with an Intel processor, or PPC G4
1 GHz or faster
Memory:
1 GB or more
Installing the driver and
control panel
In order to use this unit, you must install the
driver on to your computer. As described
below, this is an easy process using the CD-
ROM included with the unit.
Drivers are updated from time to time. You
can download the most recent version of
the driver from the TASCAM website (http://
tascam.com/).
Disconnect the unit from the computer
before starting driver installation.
CAUTION
Handle the enclosed CD-ROM with care. •
If the disc becomes scratched or dirty,
a computer might not be able to read
it, making installation of the software
impossible. If the included disc becomes
unreadable, it can be replaced for a fee.
Never attempt to play the enclosed CD-
•
ROM in an ordinary audio CD player, as
the resulting noise could damage the
speakers or harm your hearing.