Teac US-600 - Manual (Page 16)

16
TASCAM US-600
10 When the screen below appears, the
installation is complete. Click the Reboot
now button to restart the PC to use the
driver.
11 After the PC has restarted, open the
TASCAM US-600 (Start > Control Panel) or
US-600 Control Panel (Start > All Programs
>
TASCAM). If the Driver Version, Device
and other data appear correctly, the
installation has succeeded.
Installing the driver for
Mac OS X
1 Confirm that the US-600 is not
connected to the computer.
2 Double-click the TASCAM_US-600_
Driver_1.00.dmg on the included CD-
ROM. The TASCAM_US-600_1.00.mpkg" is
created on the desktop.
3 Double-click the TASCAM_US-600_1.00.
mpkg on the desktop to launch the
installer.
4 Follow the instructions on the screen to
conduct the installation.
5 Restart the computer.
6 Plug the included AC adaptor (TASCAM
PS-P520) into the DC IN 5V and confirm
that the (standby/on) indicator on
the front panel has lit.
7 Use the supplied USB cable to connect
the unit to the computer.
3 − Installation