Teac G-01 - Manual (Page 17)

17
En
gl
is
h
Frequency mode setting
(FREQ>***)
Set the clock reference frequency to 44.1 kHz or 48 kHz. Use an EXP
mode to increase the range of output frequency options that can be
used.
0 Set the reference frequency according to the playback source.
44.1kHz
Use for playback of CDs, Super Audio CDs and other 44.1 kHz
sources.
48kHz
Use for playback of DVDs, DATs and other 48 kHz sources.
(Some DVDs and DATs are recorded at 44.1 kHz. In this case, use
the 44.1kHz setting.)
0 100 kHz and 10 MHz clock output can be set and output with either
setting.
44
Sets the reference frequency to 44.1 kHz.
The frequency can be set to 44.1, 88.2 or 176.4 kHz or 22.5792 MHz.
48
Sets the reference frequency to 48 kHz.
The frequency can be set to 48, 96 or 192 kHz or 24.576 MHz.
44EXP
Sets the reference frequency to 44.1 kHz.
The frequency can be set to 44.1, 88.2, 176.4, 352.8 or 705.6 kHz or
1.4112, 2.8224, 5.6448, 11.2896 or 22.5792 MHz.
48EXP
Sets the reference frequency to 48 kHz.
The frequency can be set to 48, 96, 192, 384 or 768 kHz or
1.536, 3.072, 6.144, 12.288 or 24.576 MHz.
10M OUT connector setting
(10MOUT>***)
Turn the 10 MHz OUT connector output ON or OFF.
OFF
Turn 10 MHz OUT connector output OFF.
ON
Turn 10 MHz OUT connector output ON.