Teac G-01 - Manual (Page 7)

7
En
gl
is
h
About the transportation locking screws
The rubidium unit is attached loosely inside the G-01 because this
contributes to improving the sound quality.
For this reason, before shipment from the factory, transportation lock-
ing screws have been attached through the bottom of the G-01 to
protect the rubidium unit from vibration during transportation.
0 After removing the transportation locking screws, save them in a
safe place because you will need to reattach them before trans-
porting the unit in the future.
Transportation locking screws
Before installing the unit
Before installing the unit, remove the three transportation locking
screws.
0 Save the transportation locking screws in a safe place because
you will need to reattach them before transporting the unit in the
future.
Before transporting the unit
Before transporting the unit again, reattach the three transportation
locking screws removed when the unit was installed.