Teo 6210 ISDN Phone - Manual (Page 25)

Tone Commander 6210/6220 User Guide 21
Setting Up Multifunction Keys
From the User Options menu, you can set up Speed Dial and DSS
keys, and enable call origination for Feature Activator keys.
Call Appearance and Feature Activator keys must be assigned by a
parameter download or from the Installation Options menu.
From the User Options menu, select KEYS.
(Setup
→ USER → KEYS)
The status indicator for each key will indicate the current
setting:
Green – Call Appearance or DSS
Red
– Feature Activator
Off – Unused or Speed Dial
On the phone or Button Expansion Module, press the
multifunction key to be programmed.
The selected key’s indicator will alternately flash red and
green.
The following key settings can be changed from the User Options
menu:
Call Appearance/DSS – select CA/DN or Direct Station
Selection mode, enter a dialing string for DSS.
Feature Activator – add a CALL option to originate a call
when sending the Feature Activator code.
Speed Dial – enter a dialing string for one-button speed
dialing.
Programming procedures for each key type are described below.