Thinklogical Remote Power Distribution Unit 4/4 Manual - Manual (Page 5)

®
PDU 4/4 Product Manual September, 2014 Page 4
Note and Warning Symbols
Throughout this document you will notice certain symbols that bring your attention to important information.
These are Notes and Warnings. Examples are shown below.
Note: Important Notes appear in blue text preceded by a yellow exclamation point symbol, as
shown here.
A note is meant to call the reader’s attention to helpful information at a point in the text that is relevant to the
subject being discussed.
Warning! All Warnings appear in red text, followed by blue text, and preceded by a red stop
sign, as shown here.
A warning is meant to call the reader’s attention to critical information at a point in the text that is relevant to the
subject being discussed.
BEFORE STARTING ANY PROCEDURE, IT IS RECOMMENDED
THAT YOU READ THE INSTRUCTIONS THOROUGHLY!
Introduction
Product Overview: The PDU 4/4
Thinklogical’s
®
PDU 4/4 Power Distribution Unit is an AC Power Switch that
remotely controls the power to eight separate devices per unit.

Eight individually-controlled AC power outlets may be switched off and on as desired.

Communicates with its control terminal using a serial interface.

Each PDU 4/4 has two banks of four outlets. Each individual outlet switches a maximum
of 10 Amperes. Each bank is rated at 15 Amperes total.

Designed for rack mounting (1U) or desktop use

Available in both domestic and international models

Features redundant DC power supplies for built-in I/O and control circuits

Individually programmable Reboot Time Delay on each outlet

Solid state zero-crossing relays to minimize power spikes

Easily expandable, cascading configuration

Password Security

Front panel LCD for easy system set up and configuration

Current monitoring of each port

Software updates available at ftp.thinklogical.com
PDU 4/4 International AC (PDU-000003)
PDU 4/4 Domestic AC (PDU-000001)