Thinklogical VX Routers Manual - Manual (Page 69)

®
VX Router Manual Rev. O September, 2014 Page 68
The new interfaces file should look something like this after modification:
To set the browser to find the server:
Edit /home/user/homepage to match your installation:
This is a one line file. Change the IP address to match that of the web server (also called the “Control
Computer”) for your installation and remove “touch” from the line (if it is present).
It should look something like this when finished:
Save and exit
The files have now been configured, but the Touch Panel will not use them until the next two steps are
performed:
The touchpanel will now automatically load the page selected in the GROUPS page.