Verilink AS420 (34-00294) Product Manual - Manual (Page 15)

I n s t a l l a t i o n a n d C o n f i g u r a t i o n 7
C H A P T E R
2
C HAPTER 2
I
NSTALLATION AND
C
ONFIGURATION
Introduction
This chapter contains information and instructions required to prepare the
Verilink AS420 for use. Included are initial inspection procedures,
configuration guidelines, connection, and powering information.
Safety Summary
This manual contains information and warnings that must be followed to
ensure safe operation and retain the equipment in a safe condition.
This WARNING sign denotes a potential hazard to the operator. It calls attention
to a procedure or practice that, if not correctly performed or adhered to, could
result in injury or loss of life. Do not proceed beyond a WARNING sign until the
indicated conditions are fully understood and met.
Unpacking and Inspection
This unit is carefully packaged to prevent damage in shipment. Upon receipt,
inspect the shipping container for damage. If the shipping container or
cushioning material is damaged, notify the carrier immediately and make a
notation on the delivery receipt that the container was damaged (if possible,
obtain the signature and name of the person making delivery). Retain the
packaging material until verifying the contents of the shipment are complete
and the unit has been checked both mechanically and electrically.
If the contents of the shipment are incomplete or, if there is mechanical
damage or defect, notify Verilink. If the shipping container is also damaged,
or the cushioning material shows signs of stress, notify the carrier of the
damage as well as Verilink. Keep the shipping materials for the carrier’s
inspection. Verilink will arrange for repair or replacement without waiting for
claim settlement.