Verilink IMUX (880-503137-001) Product Manual - Manual (Page 19)

Quick Set-Up
Verilink IMUX User Manual 2-5
2. Type the slot number of the second IMUX (in this example “8”).
When the IMUX is selected, brackets ([ ]) around the I under slot 8
display with the IMUX Main Menu (
Figure 2-2 ).
Change option “R” to Invert; as described above. This IMUX will be
mapped to the M1-3.
Building Circuits
Once the ports have been placed in service and configured, the
next step is to create the connections from each application
module to another module in the shelf. The Circuit Build function
of the SCM is used to create the following connections:
• QUAD T1 module (in slot 7) network ports 1 and 2 are to be
mapped to the single data port of the IMUX module (slot 8),
supporting a router at 3.056 Mbit/s.
• T1 ports 9, 10, and 11 of the T3 and the M1-3 multiplexer
module (in slot 6) are mapped to the IMUX module in slot 5
connected to a router.