Verilink IMUX (880-503137-001) Product Manual - Manual (Page 43)

Verilink IMUX User Manual A-1
Appendix
A
Default Configuration
This appendix contains the default values for the IMUX. The
Configuration Menu for the IMUX contains default values. The
remaining menus contain blank fields or disabled features, such as
loopbacks.
Configuration Menu Defaults
The Configuration Menu contains options with default settings.
Figure A-1 shows the default values for the IMUX Configuration
Menu.
Figure A-1 IMUX Configuration Menu Defaults
-- IMUX CONFIGURATION MENU -- -- IMUX CONFIGURATION MENU -- -- IMUX CONFIGURATION MENU -- -- IMUX CONFIGURATION MENU --
FW Rev : 1.23 FW Rev : 1.23 FW Rev : 1.23 FW Rev : 1.23
Line Type : T1 DSR) no
Line Type : T1 DSR) no Line Type : T1 DSR) no Line Type : T1 DSR) no
Channel Rate : 64K CTS) no
Channel Rate : 64K CTS) no Channel Rate : 64K CTS) no Channel Rate : 64K CTS) no
R) Rx Clk Phase: NORMAL DCD) no
R) Rx Clk Phase: NORMAL DCD) no R) Rx Clk Phase: NORMAL DCD) no R) Rx Clk Phase: NORMAL DCD) no
T) Tx Clk Phase: INVERT RI) no
T) Tx Clk Phase: INVERT RI) no T) Tx Clk Phase: INVERT RI) no T) Tx Clk Phase: INVERT RI) no
F) Ref Clk Phase: NORMAL TM) no
F) Ref Clk Phase: NORMAL TM) no F) Ref Clk Phase: NORMAL TM) no F) Ref Clk Phase: NORMAL TM) no
H) DTE Handshake: AUTOMATIC
H) DTE Handshake: AUTOMATIC H) DTE Handshake: AUTOMATIC H) DTE Handshake: AUTOMATIC
DTE Type: UNKNOWN
DTE Type: UNKNOWN DTE Type: UNKNOWN DTE Type: UNKNOWN
Backplane Bus: A:A Backplane Bus: A:A Backplane Bus: A:A Backplane Bus: A:A
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8
Lines Equipped:
Lines Equipped: Lines Equipped: Lines Equipped:
Lines Active:
Lines Active: Lines Active: Lines Active:
Frame Sync:
Frame Sync: Frame Sync: Frame Sync:
CTS Received:
CTS Received: CTS Received: CTS Received:
CRC Error:
CRC Error: CRC Error: CRC Error:
Far CRC Error:
Far CRC Error: Far CRC Error: Far CRC Error:
X) main menu X) main menu X) main menu X) main menu