Verilink QUAD T1 (880-503345-001) Product Manual - Manual (Page 24)

Quick Set-Up
2-10 Verilink QUAD T1 User Manual
Figure 2-10 Circuit Manager Menu with Circuits
Cloning Circuits
With one circuit already built from the IMUX port to the first T1
port of the QUAD T1 module, the additional circuits required to
achieve the desired 6 Mbit/s data rate can be created by editing the
existing circuit and saving it with a new name. This process is
called "cloning" and it saves time.
1. While still at the Circuit Manager Menu, type "E" to edit an
existing circuit.
2. Enter the name "IMUX_T11". Circuit names are case sensitive.
The Edit Circuit Menu is displayed. See Figure 2-11 .
-- CIRCUIT MANAGER MENU [1,1] SCM Firmware 1.18 -- -- CIRCUIT MANAGER MENU [1,1] SCM Firmware 1.18 -- -- CIRCUIT MANAGER MENU [1,1] SCM Firmware 1.18 -- -- CIRCUIT MANAGER MENU [1,1] SCM Firmware 1.18 --
Page : 1 Page : 1 Page : 1 Page : 1
Total: 4 circuits
Total: 4 circuits Total: 4 circuits Total: 4 circuits
Name Type Mode Prio Source Port Dest Port Bus Status Name Type Mode Prio Source Port Dest Port Bus Status Name Type Mode Prio Source Port Dest Port Bus Status Name Type Mode Prio Source Port Dest Port Bus Status
------------ ---- ---- ---- ---------------- ---------------- --- ------
------------ ---- ---- ---- ---------------- ---------------- --- ------ ------------ ---- ---- ---- ---------------- ---------------- --- ------ ------------ ---- ---- ---- ---------------- ---------------- --- ------
codec1 perm 64k norm [1, 3] QUAD net1 [1, 2] QUAD dat1 AUT Active
codec1 perm 64k norm [1, 3] QUAD net1 [1, 2] QUAD dat1 AUT Active codec1 perm 64k norm [1, 3] QUAD net1 [1, 2] QUAD dat1 AUT Active codec1 perm 64k norm [1, 3] QUAD net1 [1, 2] QUAD dat1 AUT Active
PBX_M13 perm voice norm [1, 3] QUAD net3 [1, 6] M1-3 m13 AUT Active
PBX_M13 perm voice norm [1, 3] QUAD net3 [1, 6] M1-3 m13 AUT Active PBX_M13 perm voice norm [1, 3] QUAD net3 [1, 6] M1-3 m13 AUT Active PBX_M13 perm voice norm [1, 3] QUAD net3 [1, 6] M1-3 m13 AUT Active
IMUX_T11 perm 64k norm [1, 5] IMUX data [1, 4] QUAD net1 AUT Active
IMUX_T11 perm 64k norm [1, 5] IMUX data [1, 4] QUAD net1 AUT Active IMUX_T11 perm 64k norm [1, 5] IMUX data [1, 4] QUAD net1 AUT Active IMUX_T11 perm 64k norm [1, 5] IMUX data [1, 4] QUAD net1 AUT Active
A) add circuit L) search circuit A) add circuit L) search circuit A) add circuit L) search circuit A) add circuit L) search circuit
D) delete circuit E) edit circuit
D) delete circuit E) edit circuit D) delete circuit E) edit circuit D) delete circuit E) edit circuit
P) prev page I) activate circuit P) prev page I) activate circuit P) prev page I) activate circuit P) prev page I) activate circuit
N) next page R) deactivate circuit
N) next page R) deactivate circuit N) next page R) deactivate circuit N) next page R) deactivate circuit
X) exit this menu X) exit this menu X) exit this menu X) exit this menu
A [0.0.0.2] [1,4] QUAD T1 > A [0.0.0.2] [1,4] QUAD T1 > A [0.0.0.2] [1,4] QUAD T1 > A [0.0.0.2] [1,4] QUAD T1 >