Verilink QUAD T1 (880-503345-001) Product Manual - Manual (Page 50)

Diagnostics and Alarms
5-8 Verilink QUAD T1 User Manual
Alarm Menu
The QUAD T1 Alarm Menu is accessed by typing "A" at the QUAD
T1 Main Menu.
Figure 5-4 Alarm Menu
Table 5-3 Alarm Menu Options
Threshold
Configuration
When "C" is selected on the QUAD T1 Alarm Menu, the QUAD T1
Port Alarm Threshold Configuration Menu is presented. In the
example menu shown below, ports 1 and 2 have been set to
recommended values, while ports 3 and 4 were left at factory
default values.
Item Description
A) card alarm reporting Toggles on and off reporting of alarms for the entire module.
C) configure threshold Accesses the QUAD T1 Port Alarm Threshold Configuration Menu. See
" Threshold Configuration ".
Tn) restore default
threshold
Sets the selected port back to the factory default values, in effect - turns off
all alarm reporting for that port.
O) display alarm buffer Produces a display of all the historical and current alarms stored in the
QUAD T1 module. See " Display Alarm Buffer ".
S) alarm threshold status Produces a display which indicates which of the configurable thresholds
have been exceeded during the current 15-minute interval. See " Threshold
Status "
X) exit this menu The user returns to the QUAD T1 Main Menu.
-- QUAD T1 ALARM MENU -- -- QUAD T1 ALARM MENU -- -- QUAD T1 ALARM MENU -- -- QUAD T1 ALARM MENU --
A) card alarm reporting: no A) card alarm reporting: no A) card alarm reporting: no A) card alarm reporting: no
C) configure thresholds Tn) restore default threshold C) configure thresholds Tn) restore default threshold C) configure thresholds Tn) restore default threshold C) configure thresholds Tn) restore default threshold
O) display alarm buffer S) alarm threshold status
O) display alarm buffer S) alarm threshold status O) display alarm buffer S) alarm threshold status O) display alarm buffer S) alarm threshold status
X) exit this menu
X) exit this menu X) exit this menu X) exit this menu
A [0.0.0.2] [1,4] QUAD T1 > A [0.0.0.2] [1,4] QUAD T1 > A [0.0.0.2] [1,4] QUAD T1 > A [0.0.0.2] [1,4] QUAD T1 >