Vir2 Instruments Electri6ity Manual - Manual (Page 50)

E
LE
ct
R
i6ity
45
I don’t want the velocity behavior to control AMT and VMT. Can I adjust
the velocity curve?
Yes. Go to the ‘Settings Page’ and select ‘Calibration’. Adjust the
‘Calibration | VMT | Velocity Curve’ and ‘Calibration | AMT | Velocity
Curve’ parameters until you like the response. It‘s possible to tweak the
behavior of the retrigger keyswitches there as well.
I don’t like the CCs behavior to control AMT and VMT. Can I adjust the CC
curve?
Yes. Go to the ‘Settings Page’ select ‘Calibration’. Adjust the ‘Calibration |
VMT | CC Curve’ and ‘Calibration | AMT | CC Curve’ parameters until you
like the response.
There are so many keyswitches, I’m afraid I have to spent a lot of time to
learn them all. Is this really necessary?
In most cases you‘ll only have to learn a few of the keyswitches to control
ELECTRI6ITY. We added them to give power users the option to control
everything if needed. For example: you can manually select certain release
samples via keyswitches, but if you don‘t choose them manually, the artificial
intelligence takes over and controls the release samples for you.
What does the [F], [V], [C], and [S] tag mean on the keyswitch setup
page?
[F] means forced keyswitch (a keyswitch is only active as long as you press
it),
[V] means velocity sensitive keyswitch (see below), [C] means combined
keyswitch (see below), and [S] means standard keyswitch.
What does velocity sensitive keyswitch mean?
A velocity sensitive keyswitch does different things if played soft or hard.
For example: if you press the
‘Play Mode Legato’ keyswitch soft, it selects
the muted legato mode. If you press it harder it selects the sustain legato
mode. You can adjust the threshold on the settings page by choosing
calibration
‘VKS Switch Velocity’. The default value is 90. This means the
keyswitch state is switched by playing it with a velocity < 90 or a velocity >=
90.
What does combined keyswitch mean / how do you change the release
articulation?
To force a certain release articulation press the Select Release KS (A-1)
together with one of the release keyswitches (A#-1 to B0). The default