Front-facing webcam – HP Spectre x2 User Manual
Page 42
Front-facing webcam
Description
Spare part number
Front-facing webcam (includes cable and double-sided adhesive)
830349-001
Before removing the front-facing webcam, follow these steps:
1.
Turn off the slate. If you are unsure whether the slate is off or in Hibernation, turn the slate on, and then
shut it down through the operating system.
2.
Disconnect the power from the slate by unplugging the power cord from the slate.
3.
Disconnect all external devices from the slate.
4.
Remove the display panel assembly (see
Display panel assembly on page 20
Remove the front-facing webcam:
1.
Release the ZIF connector (1) to which the front-facing webcam cable is attached, and then disconnect
the front-facing webcam cable from the system board.
2.
Detach the front-facing webcam (2) from the back cover. (The front-facing webcam is attached to
the back cover with double-sided adhesive.)
3.
Remove the front-facing webcam and cable.
Reverse this procedure to install the front-facing webcam.
32
Chapter 5 Removal and replacement procedures