HP Spectre x2 User Manual
Page 52
Advertising
2.
Remove the two Phillips PM2.0×4.5 screws (1) that secure the USB port brackets and the system board
to the back cover.
3.
Remove the Phillips PM2.0×3.4 screw (2) that secures the audio jack bracket and the system board to
the back cover.
4.
Remove the two Phillips PM2.0×2.2 broad head screws (3) that secure the system board to
the back cover.
5.
Remove the audio jack bracket (4) and the USB port brackets (5) and (6).
42
Chapter 5 Removal and replacement procedures
Advertising