HP Spectre x2 User Manual
Page 47
Advertising
NOTE:
The WWAN “Red/Main/#5”antenna cable is connected to the WWAN module “Main” terminal.
The WWAN “Blue/Aux/#6”antenna cable is connected to the WWAN module “Aux” terminal.
2.
Detach the WWAN antenna transceivers (2) from the back cover. (The WWAN antenna transceivers are
attached to the back cover with double-sided adhesive.)
3.
Remove the WWAN antenna cables and transceivers (3).
Reverse this procedure to install the WWAN antenna.
Component replacement procedures
37
Advertising