Watson-Marlow 520Du - Manual (Page 58)

Watson-Marlow 520Du User Manual 58
20 Pin out details
Pin out details
Selecting Pin out details causes the pump to display a warning screen and then its
preset pin and voltage details under 18 headings: Analogue input 1, Analogue
input 2, Analogue output, Tacho output, Direction enable, Direction input,
Run/Stop input, Leak input, Auto/Man toggle, Dose input, Output 1, Output
2, Output 3, Output 4, Supply, 0 volts, Earth and Others. No user input is avail-
able in this section; it displays information only.
In the main menu, select Pin out details using the UP or DOWN keys and press
ENTER to confirm your choice.
The Pin out details menu
The Pin out details menu
occupies five screens.
To move from one screen to
subsequent screens, repeat-
edly press DOWN. Each item
is highlighted in turn until
the last item on the screen
is highlighted.
A further press on the DOWN key displays the next screen of the menu,
with the first item highlighted.
Follow the reverse procedure using the UP key to move to an item on a
previous screen of the menu.