ACTi Camera Firmware V.5.12.12 - Manual (Page 29)

www.acti.com
Firmware User ’s Manual V5.12.12
29
HTTPS
HTTPS is to create a secure channel over an insecure network. There are two methods to create,
Certificate Signing Request (CSR) and Self-Signed Certificate.
Certificate Signing Request (CSR) : User uses a signed certificate issued by trusted
Certification Authority (CA).
Self-Signed Certificate : User wants to use the certificate created and issued by user himself.
Press “Create” or “Create Self-Signed Certificate” button and configure settings in the pop-up
screen to install the certificate.
Note that the new setting will only take effect after “Save & Reboot”.
IEEE 802.1X
Please enable IEEE 802.1x and configure settings in the screen below. Note that the new setting
will only take effect after “Save & Reboot”.