Utilities – ACTi Camera Firmware V.5.12.12 User Manual
Page 80
Firmware User
’s Manual V5.12.12
Utilities
The
“Utilities” are responsible for managing the storage itself rather than the files on the storage.
There are three utilities
– Mount, Format and Scan.
Mount
When the Mount storage media button shows
“Mount” button then it means that the mass storage
has been inserted to the camera, but the connection between camera and the storage has not
been established yet. By pressing the
“Mount” button, the storage becomes active. It is then
possible to check the Status of the disk, write or read data on the disk, remotely access the
storage by Web Configurator or FTP client, etc.
When pressing the
“Mount” button, the mounting process will start.
Unmount
Once the drive has been mounted, it can later be unmounted by pressing
“Unmount” button, if
necessary.