ACTi Camera Firmware V.5.12.12 - Manual (Page 42)

www.acti.com
Firmware User ’s Manual V5.12.12
42
3. Motion Detection Setup
Press to edit the settings. There are set six regions on ceiling mounting type
and three regions on wall mounting type.
STEP1: Click the checkbox to enable motion detection for different preset point region .
STEP2: Choose the preset point you want to use.
STEP3: Set the sensitivity of motion detection region.
STEP4 : Set the interval time of motion detection. After a motion event is triggered, no more
events will be triggered within this time in the same region
STEP5: Set the trigger threshold of motion detection region. The larger this value, the larger
the object size needed to trigger motion detection.
STEP6 : Set the priority of these preset point to trigger the motion detection. The higher
number is the higher priority,
Click the [Apply] button to confirm the settings or click the [Reset] button to re-enter the
parameters.
Fisheye View
In Fisheye View mode, camera will provide the panorama view image, and the available video
resolution is 2032 x 1936.