Image – ACTi Camera Firmware V.5.12.12 User Manual
Page 52
Firmware User
’s Manual V5.12.12
Image
This section concerns the general video settings.
KCM-5111/KCM-5211/KCM-5311/KCM-7111/KCM-7211/KCM-3211 Models
1.
Video Flipping:
Check this box to flip the video up-down
2.
Video Mirror
: Check this box to mirror the video left-right
3.
Brightness:
Select the Brightness value. The higher the value, the brighter the image.
4.
Contrast:
Select the Contrast value. The higher the value, the sharper the contrast.
5.
Digital Noise Reduction:
Select ON or OFF to enable or disable this function. Enable this
for smooth and clear image. Disable this if your scene contains many extreme details that
may be smoothed over with DNR.
6.
Restore image settings to default:
When press this button, it will use the default image
settings.
Click the [Apply] button to confirm the settings or click the [Reset] button to re-enter the
parameters.