Adding video streams from a multi-channel device – ACTi NVR 2.3 Enterprise V2.3.04.07 User Manual
Page 40
NVR 2.3 (V2.3.05.11) User’s Manual
Adding Video Streams from a Multi-channel Device
There are devices that output more than one video streams to NVR server. For example, a
video encoder converts a number of analog video signals into the same amount of IP video
streams; certain high megapixel cameras such as ACTi KCM-5111, supports outputting
multiple VGA streams cropped from a single high resolution video source. These multiple
streams come from a single device are managed as different cameras by NVR server.
Video Encoder
Adding a stream from one video server is the same as adding a single camera.
1. If you use auto scan to add a new stream,
assign a Camera ID to it and click “Add New
Camera”.
2. If you add a new stream manually,
input the connection settings and click “Get Device
Setting”. After the page refreshes, input the channel number of the stream, and then
click “Apply”.