ACTi NVR 2.3 Enterprise V2.3.04.07 - Manual (Page 7)

www.acti.com
NVR 2.3 (V2.3.05.11) User’s Manual
7
ACTi NVR Workstation
NVR Workstation includes a set of programs that provide interface between users and the
NVR server. NVR Workstation may be installed on the same PC as the NVR server, or they
may be installed separately and connect to NVR Server via network. For NVR Professional,
workstation and server are bundled together and must be on the same PC. They are:
Active Setup
This module includes both Camera Setup and System Setup. Users can add and setup
cameras and devices, configure system parameters and e-maps here.
Active Monitor
In this module you can see live view from cameras and devices, perform PTZ operations with
mouse or Joystick, view system log, receive alert on the Event panel, setup view layouts or
survey with pre-defined multi-layout tour.
Active Player
You may find and playback existing recordings in this module. Up to 4 channels may be played
back synchronously. Snapshots or excerpted video segments can be taken from playback files.
Recorded files can also be exported to AVI format here.
Active Map
You can see camera deployment on maps here. Live video feed may also be displayed right on
the e-maps. Cycling map tour views are also defined here.
NVR Web Client
NVR Web Client is the web version of interface to access NVR. You do not have to install any
program to use Web Client, just Open IE 8.0 or IE 9.0 and type in the server web address/port
to login. Almost all of NVR workstation ’s functions can be accessed on Web Client, except a
few minor restrictions.