User roles – ACTi NVR 2.3 Enterprise V2.3.04.07 User Manual
Page 68
NVR 2.3 (V2.3.05.11) User’s Manual
User Roles
Fig. 42 System Setup - User Roles
1.
Role Name: Enter the role name for a new user role.
2.
Role Description: Enter the description of this user role.
3.
Permission Selection Panel: Select the range of permission for each user role here.
4.
User Role List: You can see all the existing roles and their permission settings here.
5.
Apply: When you first enter the User Role screen, you are by default in a
“ready to add
new User Role
” mode. You can just enter a Role name and click “Apply” to add a new
User Role. You may also select a group from the list of existing user roles below and edit
the role permissions. Always click
“Apply” before leaving to preserve changes you’ve
made.
NOTE:
Please do not change default User Roles. Default User Roles are: Administrator,
Guest, Standard User and Guard.
❷
❸
❹
❺
❶