ACTi ENR-1000 - Manual (Page 49)

www.acti.com
ENR-
1000 Series System Administrator’s Manual
49
Go to Preset Points
You may create/delete/go-to preset points in this mode.
Go to a Preset Point
Click the tab to enter Preset Points Operation mode, and click a red ID button.
Create a Presset Point
1 . Go to PTZ Operation mode , use onscreen buttons to define a view.
2 . Click the tab to enter Preset Points Operation mode.
3. Click
4 . Click the desired preset point ID and input the point name in Preset Point Setting box.
This preset point will be saved, and its ID will turn red.
Delete a Presset Point
On Preset Points Operation mode, click and then the preset point you want to delete.
2
w
1
2
1
2
3