AEC AP Series Large Dehumidifying Dryer - Manual (Page 54)

Large Dehumidifying Dryers Controls 53
Dryer Setup Display
1. Press “Temperature FAHRENHEIT” to change the temperature units to Celsius.
2. Press “CELSIUS” to change the temperature units to Fahrenheit.
3. Press “Dryer Exit Temperature High Alarm Setting” to change the high alarm limit
value for the dryer exit temperature.
4. Press “Closed Loop Temp. High Alarm Setting” to change the high alarm limit value
for the regeneration closed loop cooling heat exchanger temperature if it is installed.
This space is blank if the regeneration closed loop cooling heat exchanger option is
not installed.
5. Press the “Pre-cooler or After-cooler High Alarm Setting” to change the high alarm
limit value for the process air heat exchanger if one is installed. This space is blank
if either the pre-cooler or after-cooler option is not installed.
6. Press “Next” to proceed to the blow back filter cleaning setup display if the blow
back filter cleaning option is installed.
7. Press “Main Menu” to access the main menu display.
8. Press “Dryer menu” to return to the dryer menu display.
9. Press “Help” to access the help menu display.