AEC AP Series Large Dehumidifying Dryer User Manual
Page 9
Large Dehumidifying Dryers
Safety
8
Dryer Safety Tags
Tag
Description
Tag
Description
Read Operation &
Installation Manual
High Voltage Inside
Enclosure
Hot!
Lifting Point
PE
Protected Earth
Ground
Earth Ground
1-2 Warnings and Precautions
Our equipment is designed to provide safe and reliable operation when installed and operated
within design specifications, following national and local safety codes. This may include, but
is not limited to OSHA, NEC, CSA, SPI, and any other local, national and international
regulations.
To avoid possible personal injury or equipment damage when installing, operating, or
maintaining this equipment, use good judgment and follow these safe practices:
;
Read and follow these operation and installation instructions when installing,
operating, and maintaining this equipment. If these instructions become
damaged or unreadable, additional copies are available from the manufacturer.
;
Follow all SAFETY CODES.
;
Wear SAFETY GLASSES and WORK GLOVES.
;
Work only with approved tools and devices.
;
Disconnect and/or lock out power before servicing or maintaining the equipment.
;
Use care when LOADING, UNLOADING, RIGGING, or MOVING this
equipment.
;
Operate this equipment within design specifications.
;
OPEN, TAG, and LOCK ALL DISCONNECTS before working on equipment.
You should remove the fuses and carry them with you.
;
Make sure the equipment and components are properly GROUNDED before you
switch on power.
;
When welding or brazing in or around this equipment, make sure VENTILATION is
ADEQUATE. PROTECT adjacent materials from flame or sparks by shielding with
sheet metal. An approved FIRE EXTINGUISHER should be nearby and ready for
use if needed.
;
Do not restore power until you remove all tools, test equipment, etc., and the
equipment and related components are fully reassembled.