Amped Wireless AP600EX - High Power Wireless-N 600mW Pro Access Point - Manual (Page 20)

AP600EX USER’S GUIDE
19
WIRELESS SETTINGS
Basic Settings
The Wireless Basic Settings page allows you to adjust
settings for your wireless network. These settings are
for adjusting the Pro Access Point after you have
already gone through the Smart Setup Wizard and
wish to adjust your current configurations.
Disable Wireless LAN Interface: Turns off all wireless
access.
Band: Allows you to setup access under a specific combination of Wi-Fi speed standards.
Broadcast SSID: Disabling the broadcasting of your SSID will make it so outside users cannot see your network
when they scan for wireless networks. Users must manually enter the SSID to connect.
Data Rate: Adjust the speed of your wireless network. It is recommended that you use Auto for this selection.