Amped Wireless AP600EX - High Power Wireless-N 600mW Pro Access Point - Manual (Page 33)

AP600EX USER’S GUIDE
32
also manually control the IP settings of the Pro Access Point by choosing, Client, Server or Disabled from the
DHCP drop down menu. This is only for advanced users.
DHCP Client Range: The range of IP addresses the Pro Access Point’s DHCP server will assign to users and
devices connecting to the Pro Access Point.
Disabled / Static DHCP: If your network requires the use of manual IP address assignments, select this option.
You may manually enter the IP address settings of the Pro Access Point so it reflects the correct addresses to
work with your specific network.
Note: In Static IP mode, the setup URL: http://setup.ampedwireless.com will no longer work. You will need to
manually enter the IP address of the Pro Access Point to access the setup menu in the future.
Domain Name: The Domain Name allows you to change the URL which is used to access the Setup Menu for
the Pro Access Point. For example, entering http://setup.ampedwireless.com into your web browser while
connected to the Pro Access Point, will guide you to the Web menu for the Pro Access Point. By changing the
Domain Name, you will change the URL entered to access the Web menu. If you forget the Domain Name you
entered and can no longer access the Web menu, then you will need to reset your Pro Access Point to default
settings by holding down the reset button on the back panel for 5-10 seconds.