Amped Wireless AP600EX - High Power Wireless-N 600mW Pro Access Point - Manual (Page 21)

AP600EX USER’S GUIDE
20
SSID of Wireless network: This is the name of your Wireless network and the name that users will scan for to
connect wirelessly.
Multiple SSID: You may add one additional (SSID) to you Wireless network. The additional SSID can have its
own security, band and data rate settings. You may restrict users for specific SSIDs or provide access only to
some users with lower bandwidth by changing the band. (i.e. only allow 802.11b access to specific users)
Channel Width: Wi-Fi operates in two separate channel widths, 20Hz and 40Hz. 20Hz allows operation on
channels 1-11, while 40Hz is 5-11. 40Hz allows for faster speeds. Select the channel width you wish to use for
your network.
Control Sideband: This relates to the channel number used for your wireless network. An upper band
represents higher channels and vice versa.
Channel Number: The channel number used for your wireless network. If there are other wireless networks
using the same channel, this may cause slower performance. You may adjust the channel here to attempt to
improve performance through less interference.
WMM: Prioritizes audio and video content going over your wireless network.
Associated Clients: Displays all wireless connections to the Pro Access Point