Amped Wireless APR175P - ProSeries High Power AC1750 Wi-Fi Access Point / Router - Manual (Page 34)

APR175P USER’S GUIDE
33
WDS Settings
WDS - AP mode requires additional Access Points also functioning in
WDS - AP mode. Each WDS enabled Access Point connects to the
other via MAC addresses. Enter the MAC addresses of the Access
Points with WDS enabled into the corresponding fields that you wish
to connect to.
For WDS connections to work properly, the MAC address
associations must also be configured on each individual WDS
enabled Access Point, not just the one you are currently configuring.
For example, if you are connecting three WDS-APs, AP 1 must have
AP 2 and AP 3’s MAC address conifgured, while AP 2 has AP 1’s and
AP 3’s MAC, and AP 3 has AP 1’s and AP 2’s MAC configured.
Encryption can be used to secure your WDS connections. If you
choose to use encryption (recommended), it is important that you
set the same security key setting on all connected WDS enabled
Access Points. Click
Next to continue.