Archgard 31-DVIE33N - Manual (Page 14)

31-DVIE33
14
CONVERT THE GAS VALVE
CONVERSION KIT INSTRUCTIONS CONT.
COMPLETE THE CONVERSION
Turn on the gas and electrical supplies.
Turn on the fireplace so the burner is on
Check for leaks at all connections.
Test inlet and outlet pressure. Visually check pilot flame. Flame should envelope top of the flame sensor and extend
forward onto the burner. To adjust pilot turn the pilot adjustment screw on the control valve clockwise to
decrease or counter clockwise to increase pilot flame.
Turn fireplace off
Affix gas type label to the rating plate label. (Bottom right side, under the door frame of insert on pull chain)
Complete the conversion label and affix to valve assembly plate.
Re-install the burner, brick, logs, embers and door. (per the instructions starting on pg. 19)