Dvie33, Control panel locations – Archgard 31-DVIE33N User Manual
Page 8
Advertising
31-DVIE33
8
The control panels can be mounted in the following different ways. They are shipped in the “Controls In” configuration. They
can be moved to the “Controls Out” configuration by removing the two mounting screw on each side and swinging the panels
out and replacing the screws. They can also be disconnected and placed remotely within the limits of the gas connections and
electrical wiring making sure to place them away from any heat source over 150 degrees Fahrenheit or 65 degrees Celsius
CONTROL PANEL LOCATIONS
Advertising
This manual is related to the following products: