Eneo EDC-3371 - Manual (Page 33)

33
7. Short Cut Key
Short Cut Key Function
PRST Pop up preset setup menu
TOUR Pop up Tour setup menu
PTRN Pop up Pattern setup menu
SCAN Pop up Auto Scan setup menu
NO. + PGM + PRST Store the current view at the selected number
Short Cut Key Function Short Cut Key Function
1 + ON Turn On Relay  1 + OFF Turn Off Relay
2 + ON Turn On Relay  2 + OFF Turn Off Relay
3 + ON Turn On Relay 3 3 + OFF Turn Off Relay
4 + ON Turn On Relay 4 4 + OFF Turn Off Relay
7 + ON Change FOCUS to AUTO 7 + OFF Change FOCUS to manual
8 + ON Change AE to AUTO 8 + OFF Change AE to manual
9 + ON Change Night Shot to AUTO
10 + ON Night Shot ON (go to the manual mode) 10 + OFF Night Shot OFF (go to the manual mode)
11 + ON BLC ON (AE auto mode) 11 + OFF BLC OFF (AE auto mode)
12 + ON Digital Zoom ON (According to digital zoom setting) 12 + OFF Digital Zoom OFF
13 + ON Dome OSD ON 13 + OFF Dome OSD OFF
14 + ON Dome Area Title Display ON 14 + OFF Dome Area Title Display OFF
15 + ON View Direction ON 15 + OFF View Direction OFF
100 + ON Shutter speed auto
101 + ON Shutter speed /4 (PAL /3) sec
102 + ON Shutter speed / sec
103 + ON Shutter speed  sec
104 + ON WDR ON 104 + OFF WDR OFF
105 + ON Image Stabilizer ON 105 + OFF Image Stabilizer OFF
150 + ON Image Flip ON 150 + OFF Image Flip OFF
151 + ON Origin Check
152 + ON Place the camera in the 0° area horizontally.
153 + ON Go to the slow speed mode 153 + OFF Go to the normal speed mode
154 + ON Display System Information
155 + ON Flip the camera in the 80° area horizontally.
250 + ON Set the dome ID up to 3999
888 + ENTER Night Shot ON (in the global mode only)
999 + ENTER Night Shot OFF (in the global mode only)
Some function may not operate according to the model.