Eneo EDC-3371 - Manual (Page 5)

5
3. Installation and Configuration
3.1 Package Contents
The package contains the following:
x Fastrax III (Dome Camera)
x Bubble ring (optional)
x Instruction manual (this document)
3x Assembly screws for attaching Fastrax III
3x Plastic anchor
x 0Pin Connector
x Pin Connector
CAUTION: Be sure to have caution labels (E version only) on both body and base of the camera.
Different version will not support alarm input and output.
The dome camera is for use in surface mounting applications and the mounting surface should be capable of supporting loads up to 4.5kg.
The dome camera’s base should be attached to a structural object, such as a hard wood, wall stud or ceiling rafter that supports the weight of the dome
camera.
Figure 3 - Installation
Cable entry
Surface (ceiling)
Base
Align extruded tap in the base to
the keyhole on the PCB in the body
Body
Lock Unlock
Lock