H3C Technologies H3C SecPath F100-C-EI - Manual (Page 32)

Installation Manual
H3C SecPath F100-C-EI Firewall
Chapter 3 Installing the Firewall
3-3
2) Install the mounting brackets on the firewall
Fix the mounting brackets to the two sides of the front panel of the
firewall chassis with screws, as shown in the figure.
Figure 3-3
Install the mounting brackets on the firewall
II. Install the firewall in a rack
1) Ensure that the rack is stable and properly grounded.
2) After the firewall is installed with the mounting brackets, fix
the mounting brackets to the rack firmly using pan head
screws (M6 or a smaller size, antirust treated), and ensure
the firewall chassis is level.
Figure 3-4
Fix the firewall on the rack