H3C Technologies H3C SecPath F100-C-EI - Manual (Page 67)

Installation Manual
H3C SecPath F100-C-EI Firewall
Chapter 5 Maintaining Software
5-17
At the prompt ftp>, begin uploading/downloading the desired file.
Step 3: Upload/download the application program/configuration
file or upload Boot ROM program.
Note:
By default, the application file and configuration file on the firewall are
respectively named “system” and “config.cfg”, the file of the extended
Boot ROM program segment is named “bootrom”, and the entire Boot
ROM file name defaults to “bootromfull”.
z
Upload the application program/Boot ROM/configuration
file.
ftp> put Put means uploading the file.
local file Type the name of the application
program/Boot ROM/configuration file to be uploaded.
remote file Type the name of the application
program/Boot ROM/configuration file to be saved after it
is uploaded to the firewall.
After the upload is completed, the prompt ftp> will be displayed
again. Type dir to display the name and size of the file on the firewall.
The size of the configuration file will be the same as that of the file on
the host if the upload is successful.