H3C Technologies H3C Intelligent Management Center - Manual (Page 127)

h. Click Next.
The Configuration Summary page appears. On that page, you can view VPN information,
and configurations to be deployed to UPE, NPE 1, and NPE 3.
6. Select Deploy Immediately and click OK.
The Task List page appears. On that page, you can view the VPN deployment results.
Figure 23 VPN deployment results
Viewing the VPN topology
1. Click the Service tab.
2. From the navigation tree, select L2VPN Manager > L2VPN Topology.
The L2VPN topology page appears.
3. On the toolbar at the top of the topology page, click the VPN List icon.
The VPN List tab appears at the right of the topology.
4. Configure the following query criteria:
{
Name—Enter VPN name VPLS002.
{
Type—Select VPLS from the list.
5. Click Query.
All matching devices are displayed in the VPN List area.
6. Double click a VPN in the VPN List.
The topology for the VPN is displayed.
117