H3C Technologies H3C Intelligent Management Center - Manual (Page 81)

The report data is displayed below the Query Condition area.
Managing enterprise's MPLS VPN
As shown in Figure 16 , the enterprise uses MPLS VPN Management to manage its own MPLS VPNs.
MPLS VPN Management accesses the network through a management CE, manages the P and PE
devices through public addresses, and manages the CEs through the management VPN.
Fully meshed VPN 1 and VPN 2 carry VPN traffic. The hub-spoke management VPN carries
management traffic between MPLS VPN Management and devices, and isolates sites at Layer 3. On the
management PE (hub of the management VPN), configure the import RT value as 200:1 and the export
RT value as 200:2. On each PE, configure a service VPN and a management VPN. On each spoke of
the management VPN, configure the import RT value as 200:2 and the export RT value as 200:1.
Figure 16 Network diagram
Perform the following tasks to manage enterprise MPLS VPNs with MPLS VPN Management:
1. Configuring the management VPN
2. Adding VPN 2
3. Troubleshooting
71