H3C Technologies H3C Intelligent Management Center - Manual (Page 36)

3. Click the name link of a VPN to enter the VPN details page. The page consists of four areas,
topology and audit information links, VPN basic information, VPN components, and recent 10
unrecovered alarms.
Area 1: Topology and audit information links
This area provides the operation links for viewing the access topology, service topology, and audit
information.
{
To view the access topology, click the Access Topology link on the upper right of the page. For
information about the access topology, see "
Global topology ."
{
To view the service topology, click the Service Topology link on the upper right of the page. For
information about the service topology, see "
Global topology ."
{
To view the audit information, click the Audit information link on the upper right of the page. For
information about the audit information, see "
Viewing VPN connectivity audit information " and
" Troubleshooting ."
Area 2: VPN basic information
{
VPN Name—Name of the VPN.
{
Audit Period—If you have set an audit period, this field displays the VPN audit period in hours.
If the audit period is not set, this field displays Not audit.
{
Abnormal Links—Number of abnormal links.
{
Description—Description of the VPN.
{
Audit Inter-Spoke Unconnectivity—This field is displayed when the audit period is configured.
Yes indicates that inter-spoke unconnectivity is audited. No indicates that inter-spoke
unconnectivity is not audited.
{
Last Audit Time—Time when the last audit occurred, in the format YYYY-MM-DD hh:mm:ss.
To modify VPN basic information, click Modify. The Modify VPN page appears. For more
information, see "
Modifying a VPN ."
Area 3: VPN components
This area consists of six tabs, SC List, PE List, CE List, SA List, Performance, and CE-CE Link. Click
the link to view the corresponding list.
{
SC list
The SC List tab is used to view, add, modify, and delete an SC.
SC List contents
− SC Name—Name of the SC.
− SC Networking Type—Network type of the SC, Hub-Spoke and Full-Mesh.
− HUB's Import RT—Import RT value of the hub.
− HUB's Export RT—Export RT value of the hub.
26