H3C Technologies H3C Intelligent Management Center - Manual (Page 28)

20
QoS function Subfunction Parameters
Traffic Mirroring
Mirror Type is
Interface
• Layer-2 Ethernet—Mirror packets to a Layer 2 Ethernet
interface.
• Layer-2 GE—Mirror packets to a Layer 2 GE interface.
• Layer-2 XGE—Mirror packets to a Layer 2 10-GE
interface.
• Layer-3 Ethernet—Mirror packets to a Layer 3 Ethernet
interface.
• Layer-3 GE—Mirror packets to a Layer 3 GE interface.
• Layer-3 XGE—Mirror packets to a Layer 3 10-GE
interface.
• Tunnel—Mirror packets to a tunnel interface.
• Multiple Interface—Mirror packets to a multiple
interface.
• POS—Mirror packets to a POS interface.
• CPOS—Mirror packets to a CPOS interface.
• OLT—Mirror packets to an OLT interface.
• ONU—Mirror packets to an ONU interface.
• Serial—Mirror packets to a serial interface.
• MP Group—Mirror packets to an MP-group interface.
• Layer-3 Aggregate Interface—Mirror packets to a Layer
3 aggregate interface.
• Layer-2 Aggregate Interface—Mirror packets to a Layer
2 aggregate interface.
• NetStream—Mirror packets to an interface that supports
NetStream.
• ATM Interface—Mirror packets to an ATM interface.
• ATM Subinterface—Mirror packets to an ATM
subinterface.
Mirror Type is CPU CPU—Mirror packets to the CPU.
Mirror Type is
VLAN
VLAN—Mirror packets to a VLAN.
Direction of
interface Direction of
interface
• Inbound—Deploy a QoS policy to the inbound direction
of device interfaces.
• Outbound—Deploy a QoS policy to the outbound
direction of device interfaces.
QoS policies on
VLAN
Direction of VLAN
• Inbound—Deploy a QoS policy to the inbound direction
of VLANs.
• Outbound—Deploy a QoS policy to the outbound
direction of VLANs.
Wred WRED Type
• IpPrecBased—IP precedence-based WRED.
• DscpBased—DSCP-based WRED.
WRED Class N/A N/A
CAR CIR
• Lower Limit—Start value of the value range for the CIR.
• Upper Limit—End value of the value range for the CIR.
• Granularity—Granularity for the CIR. The CIR must be an
integral multiple of the granularity.