H3C Technologies H3C Intelligent Management Center - Manual (Page 31)

23
QoS function Subfunction Parameters
GTS
CIR
• Lower Limit—Start value of the value range for the CIR.
• Upper Limit—End value of the value range for the CIR.
• Granularity—Granularity for the CIR. The CIR must be an
integral multiple of the granularity.
CBS
• Lower Limit—Start value of the value range for the CBS.
• Upper Limit—End value of the value range for the CBS.
• Granularity—Granularity for the CBS. The CBS must be
an integral multiple of the granularity.
EBS
• Lower Limit—Start value of the value range for the EBS.
• Upper Limit—End value of the value range for the EBS.
• Granularity—Granularity for the EBS. The EBS must be
an integral multiple of the granularity.
Maximum Queue
Length
• Lower Limit—Start value of the value range for the
maximum queue length.
• Upper Limit—End value of the value range for the
maximum queue length.
Global QoS
Match criteria type:
• IP
• IPX
• ARP
• AppleTalk
• SNA
• NetBEUI
• IPv4 TCP Port
• IPv4 UDP Port
• IPv6 TCP Port
• IPv6 UDP Port
• IPv4 Address
• IPv6 Address
• DSCP
• IP Precedence
• VLAN
Priority configured for packets meeting a match criterion:
• DSCP.
• 802.1p.
CARL N/A
• Source IP Address—Match packets with the specified
source IP address.
• Match MAC Address—Match packets with the specified
MAC address.
• Destination IP Address—Match packets with the
specified destination IP address.
• DSCP—Match packets with the specified DSCP value.
• IP Precedence—Match packets with the specified IP
precedence value.
• MPLS EXP—Match MPLS packets with the specified MPLS
EXP value.