Grass Valley Imagestore 750 v.3.0.1 - Manual (Page 119)

103
Imagestore 750
User Manual
In the Imagestore 750 Configurator, select ‘System Settings > Master Control > Preferences’:
Fig. 5-48: Imagestore Configurator - Master Control Preferences
Configure the following settings:
• ‘Cut all from air on hot PGM switch’.
This option cuts down everything that currently contributes to air — (keyers, voice-overs,
etc.) — when the program source is hot-switched.
The rationale for this behavior is that none of the graphics will apply to the new source on
program.
• ‘Rearm mix on preset bus source change’.
When the preset source changes to a source different from program, the last used A/B mix
type will be armed.