Grass Valley K2 Dyno v.1.6 - Manual (Page 74)

74 K2 Dyno Controller User Manual 15 April 2010
Chapter 4 Playback
1. In the HOME screen, make sure that the controller is in the on-air preview mode.
• If the controller is in the on-air preview mode, the screen shows
"OnAirPreview".
• If the controller is in the multi-channel mode, the screen shows "MultiChannel".
Switch to the on-air preview mode by pressing the PGM or PVW button after
pressing the Shift button.
• The program channel becomes the target for operations.
2. Begin a live playback in the program channel.
Program Channel Preview Channel