Grass Valley SSP-3801 Installation v.1.2 - Manual (Page 23)

19
SSP-3801
Installation and Configuration Guide
To start the SSP-3801 card:
1 If it is not already done, power up the Densité 3 frame with the SSP-3801 card properly
inserted.
The card will run its start up procedure.
2 Once the card’s start-up procedure is complete, ensure that the card’s Status and
Genlock LEDs are illuminated.
3 Press the SSP-3801’s Select button on the card’s front-edge. Ensure that the Densité 3
frame’s local control panel properly displays SSP-3801 and the slot number, followed
by its
Status menu item.
Installing a second on-board solid state storage drive
If you require additional storage space for media, you can order and install a second solid
state storage drive (SSD) on the card.
Genlock LED
Status LED
Select
button