Grass Valley SSP-3801 Installation v.1.2 - Manual (Page 45)

41
SSP-3801
Installation and Configuration Guide
CQX Compact
Router To configure the CQX Compact router:
1 In the IP Address field, type the IPv4 address in dotted quad
format of the NVision Compact CQX router.
2 In the Port field, type the port number used for communication
with the NVision Compact CQX router over the UDP protocol.
Normally, the port number should be 5194 unless it was configured
differently on the router itself. The card will automatically open the
defined port in the SSP-3801’s firewall.
3 In the User ID field, type the user ID configured in the NVision
Compact CQX router. Normally, the user ID should be 61441 unless it
was configured differently on the router itself.
4 In the Post Router Tally Delay field, type the value in milliseconds
(between 0 to 2000 ms) representing the delay between when the
message is received from the router controller confirming that the
switch has been made and when the actual switch is performed by
the router frame.
5 The router settings must be saved and the router must be online
before the router destinations can be configured. Click
Save .
6 In the Destinations section, define the router destinations for the
inputs on the card. For each input:
• Click the Select button.
• Click Refresh to obtain a list of the available router sources.
• Click the desired router source and click Select. To filter the list,
type the name of the router source in the Search field. To order
the list, click the arrows in the column headers.
Type Configuration