HEIDENHAIN TNC 306 Technical Manual - Manual (Page 177)

3/97
TNC 406/TNC 306 6 Display and operation 4 4-77
MP950 Datum point for positioning blocks with M92
Entry range: –30 000.000 to +30 000.000 [mm] or [°]
Values referenced to the machine datum
MP950.0 X axis
MP950.1 Y axis
MP950.2 Z axis
MP950.3 Axis 4
MP950.4 1) Axis 5
MP960 Shift of the reference point
Entry range: –30 000.000 to +30 000.000 [mm] or [°]
MP960.0 X axis
MP960.1 Y axis
MP960.2 Z axis
MP960.3 Axis 4
MP960.4 1) Axis 5
1) only TNC 406