HEIDENHAIN TNC 306 Technical Manual - Manual (Page 392)

7-102
TNC 416/TNC 406/TNC 306 Commands 3/2000
3.14.2 ADD (+)
Abbreviation for PLC Editor: +
Execution time [µs] < 80
Number of bytes STRING memory: 10
Immediate STRING: 18 + n
STRING from error message or dialog files 24
Operands: S <arg>
Operation:
With this command another STRING is added to the STRING in the STRING Accumulator. The
selection of the STRINGS, which should be added, proceeds using the Argument <arg> after the
operand designation. Refer also to operand explanation. The resultant STRING must not be longer
than 128 characters.
3.14.3 Storing a STRING (=)
Abbreviation for PLC Editor: =
Execution time [µs] < 80
Number of bytes STRING memory 10
Immediate STRING —
STRING from error message or dialog files —
Operands: S <arg>
Operation:
With the = command a STRING from the STRING Accumulator is stored in a STRING memory. The
selection of the memory, into which the STRING should be copied, proceeds using the Argument
<arg> after the operand designation. Whereby only the Arguments 0 – 3, which address a STRING
memory (S0 – S3) are valid here.