HEIDENHAIN TNC 306 Technical Manual - Manual (Page 234)

4-134
TNC 406/TNC 306 14 Electrode changer 2/97
14.2.4 PLC module "SELECT NEW TOOL"
Gather New Electrode from Defined Rack Position
Push
T-code -1
to Stack
Module:
POC. REG.
UNCLAMP
TOOL
Module:
PLC. POS.
Z DOWN
Clamp tool &
load SPIREG
with T-code
Module:
PLC. POS.
NEUTRAL
END
No
Yes
RACK
POSITION
REACHED
?